Structural Steel · H Sections
H Beam Steel Supplier
H beams are sourced by section series, nominal dimensions and grade under a governing standard. Noor Deira Steel reconciles each H-beam designation and hands a verified specification forward for quotation.
Free, no-obligation designation review
Price always on request — confirmed against your specification
Section identificationSelecting an H Beam
Identify the exact H section, not just the depth
An H-beam is not defined by nominal depth alone. The same nominal depth spans families with different flange widths, web and flange thicknesses and unit masses. Pick the series and the exact table designation so the order is unambiguous.
- Series and designation — for example IPE, HEA, HEB, HEM or UB, UC, W-shape.
- Nominal depth and flange geometry, or the exact table designation.
- Grade and governing standard — the chemistry and limits you require.
H-Beam Designation Checker
Check whether an H-beam designation is fully specified
Enter the designation from your drawing or enquiry. The checker validates the format of the section — which series is present and whether an exact table designation is fixed. It does not calculate capacity, mass or load at design value.
Guidance
An H-beam enquiry is quote-ready only when the section series/designation, nominal depth and flange geometry or exact table designation, steel grade/standard, length, quantity and documentation requirements are fixed; do not substitute another I/H family solely because the nominal depth looks similar.
Enter a designation to check
The result tells you whether the series is recognised and what still needs to be fixed before the enquiry is unambiguous. No structural capacity is shown.
H-Beam Specification
Specify the H section, then the grade and standard
Every H-beam order is anchored to a governing standard. The designation defines geometry; the grade defines chemistry and mechanical minimums. None of these are assumed — each is confirmed together so the enquiry is unambiguous.
Series & designation
IPE, HEA, HEB, HEM, UB, UC, W-shape plus the exact table section
Nominal depth & flange
Depth (mm) and flange width — or the exact table designation
Grade & standard
For example S355 to EN 10025-2, or A572 Gr.50 to ASTM
Length, qty & documents
Cut length, quantity, MTC and test documents agreed up front
The governing standard
Hot-rolled H and I section dimensions and masses are defined by standards such as EN 10025 and the section dimension tables. Confirm the exact standard that governs your project so the offered section and its tolerances match the drawings.
Section geometry under verificationQuality & Verification
Verified against the heat and mill, not a catalogue
Each H-beam consignment ships with a Mill Test Certificate reporting chemistry and mechanical properties traceable to the heat and mill of origin. Dimensional tolerances and section properties are confirmed against the governing standard and the MTC — not assumed from the nominal depth.
- Mill Test Certificate issued per consignment.
- Dimensional and tolerance verification against the standard.
- Supplementary test and inspection documents quoted on request.
Consignment inspectionH-Beam Applications
H beams where loads are carried horizontally and vertically
H sections appear across structural steelwork — in frames, girders and columns. Each use raises a different concern that the enquiry should resolve.
Bridge Girders
Girder specification and documentation against project standards.
Pre-Engineered Buildings
Fast, exact section selection and fabrication hand-off.
Energy & Industrial
High-strength grades and controlled tolerances.
GCC Supply
H-beam supply coordinated across the GCC
Each GCC destination has an H-beam supply page covering section specification, documentation and delivery coordination for that country.
United Arab Emirates
Structural steel supply coordinator for this GCC market.
Saudi Arabia
Structural steel supply coordinator for this GCC market.
Qatar
Structural steel supply coordinator for this GCC market.
Kuwait
Structural steel supply coordinator for this GCC market.
Bahrain
Structural steel supply coordinator for this GCC market.
Oman
Structural steel supply coordinator for this GCC market.
Commercial Support
A commercial desk for H-beam procurement
The commercial department reviews each H-beam enquiry for designation clarity, grade-and-standard consistency and documentation before quoting — so the first response already answers the questions that usually delay a frame order.
Address
Office 1015, Churchill Executive Tower, Business Bay, Dubai, United Arab Emirates
Monday – Saturday: 8.00 AM – 6.00 PM · Sunday: Closed
Pricing
Price on request
Availability and pricing are confirmed against your H-beam specification.
Company
Noor Deira Steel Trading L.L.C.
B2B steel distributor based in Dubai, UAE.
Adjacent Products
Steel that completes the same frame
H beams rarely ship alone. These adjacent products extend the same specification discipline to the rest of the structural package.
Expert Insight
H and I section dimensions and masses are standardised — use the tables
An H-beam's dimensions and unit mass are not a matter of estimate. British Standard BS EN 10365 defines the hot-rolled H and I sections and their dimensions and masses, giving a single reference for reconciling a designation against a drawing before order.
The practical consequence for a buyer: when a drawing gives a nominal depth, confirm the exact section in the governing table — web and flange thickness, and the resulting unit mass — rather than assuming a section from the depth alone. This is the difference between a clean RFQ and a clarification loop.
Source reference
BSI — BS EN 10365:2026, Hot-rolled steel channels, I and H sections — dimensions and masses.
Information captured as of .
View the standardWhat a quoted H beam should pin down
- 1Exact section series and designation (IPE, HEB, UB, W…) with full table reference.
- 2Nominal depth and flange width, or the exact table dimensions.
- 3Grade and governing standard (chemistry and mechanical minimums).
- 4Length, quantity, surface and documentation — confirmed against the specification.
Why Buyers Choose This Approach
Advantages that hold up to scrutiny
Each claim below is tied to a real procurement concern and how the enquiry handles it — not to unverified superlatives.
| Buyer concern | How it is addressed | What you can verify |
|---|---|---|
| Nominal depth but no exact designation | The designation is pinned to the series and exact table section before quoting. | A single, unambiguous H-beam designation. |
| Grade and standard drift | Grade is reconciled against the governing standard at intake. | Quotation states the exact standard and grade. |
| Section property ambiguity | No capacity or mass is assumed — confirmed against tables and MTC. | A confirmed dimensional and mass set. |
| Documentation delays | MTC and test documents are agreed against the standard up front. | Document list in the RFQ states every deliverable. |
Site-ready documentation
MTC and test documents coordinated to the project's hold points.
Fabrication hand-off
Cut, drill and weld preparation aligned to the shop's requirements.
The Procurement Journey
From designation to delivery, in clear stages
A compact route showing what happens between your H-beam requirement and the handover — each stage tied to a real concern.
Requirement
Series, designation, grade, length and quantity.
Designation review
Section reconciled against the governing table.
Quotation
Availability and pricing on request.
Order
Purchase order confirmed against the quotation.
Fabrication prep
Cut, drill and surface agreed with the shop.
Quality & documents
MTC and test documents verified.
Dispatch
Bundled and coordinated to the destination.
Delivery & follow-up
Handed to site with closed-out documents.
H-Beam FAQ
H-beam sourcing, answered directly
What defines an H beam versus an I beam?
H and I sections are both hot-rolled structural sections with a vertical web and two flanges. The practical distinction in procurement is the exact series and table designation, not the letter used — confirm the section in the governing table rather than relying on the name.
What information does an H-beam RFQ need to be quote-ready?
The section series and designation (or nominal depth and flange geometry), grade and governing standard, length, quantity, surface or coating, and documentation requirements. The H-Beam Designation Checker on this page helps you confirm whether that is fixed.
Can I request an H beam without knowing the exact designation?
Yes — but the enquiry is not quote-ready until the exact section is fixed. Provide the series and nominal depth; we help reconcile the exact table designation, grade and documentation before quoting. Do not substitute another I/H family on nominal depth alone.
Do you supply Mill Test Certificates with H beams?
Yes — a Mill Test Certificate is issued per consignment, reporting chemical composition and mechanical properties traceable to the heat and mill of origin. Supplementary test and inspection documents are quoted on order-specific request.
Do you support GCC delivery for H beams?
Noor Deira Steel coordinates H-beam supply across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain and Oman, with Incoterms, packaging and destination documents agreed per order. Lead time is confirmed against the specification at quotation.
Is pricing shown for H beams?
No — price is always on request. Availability and pricing are confirmed against your H-beam specification, never shown without a defined order.
Request an H-Beam Quote
Hand the commercial department a verified H-beam specification and it responds with availability and pricing. Price is always on request.
Office 1015, Churchill Executive Tower, Business Bay, Dubai, United Arab Emirates
Monday – Saturday: 8.00 AM – 6.00 PM · Sunday: Closed
Getting your quote
- 1
Prepare the specification
Series/designation, nominal depth and flange geometry or exact table section, grade/standard, length, quantity and documentation.
- 2
Use the locked RFQ or WhatsApp
Send the verified specification to the commercial desk for availability and pricing.
- 3
Receive the quotation
The commercial department replies with pricing on request and the agreed delivery path.
Price on request · Mill Test Certificates supplied with each consignment · GCC delivery planned per order